Every Claude Code session, at a glance
cyberviber is a 2.4″ ESP32 touch display that lists the Claude Code (and Mistral Vibe) sessions running on your computer, shows each session's state sorted by urgency, and lets you tap a session to focus its terminal pane, tab and window. It is an open-source build-it-yourself project: Claude Code hooks report events to a Go daemon (cyberviberd), which sends state over USB serial to the ESP32-2432S024R "Cheap Yellow Display", which renders the list with LVGL. The hardware is a cheap off-the-shelf board you flash yourself with PlatformIO; the software installs via `go install` and a single `cyberviber install` command that wires up hooks, a status line and a launchd/systemd daemon.
Claude Code hooks report to the daemon, which tracks four states — needs you (permission prompt or question, blinks and wakes the backlight), ready (turn finished), working (thinking or running tools, with an activity line showing the current step) and idle (no events for a configurable ten minutes)
Tapping a session sends a focus command back over USB; the daemon focuses the multiplexer pane first, then the tab, then the window. Works on macOS and on Linux with Hyprland.
Vibe sessions appear in the same list via ~/.vibe/hooks.toml, with reduced information: sessions show up on first tool call or finished turn, questions show as needs-you, but permission prompts still show as working and there is no context usage.
Five layouts named after desktop tools (tiling, waybar, btop, walker, hyprlock), switchable on-device by swipe or BOOT button, and eleven themes from Omarchy set with `cyberviber theme nord`, using each palette's red/yellow/green for states.
A Go daemon (cyberviberd, run via launchd or systemd) keeps the session list including idle timer, process check and context usage; the ESP32 is a stateless renderer that draws what the daemon sends and reports taps. One USB cable handles both power and data — Wi-Fi is not used.
`cyberviber sim` runs a browser simulator with live sessions at 127.0.0.1:7337 without hardware. Additional CLI commands include `cyberviber status` (session table in your shell), brightness/dim control, screen orientation (usb bottom), and screenshot to PNG.
Claude Code hook events (PermissionRequest, AskUserQuestion, Stop, UserPromptSubmit, PreToolUse) are posted to localhost; sessions that started earlier are found in ~/.claude/sessions.
cyberviberd (Go, run via launchd/systemd) maintains the session registry: state, idle timer, process check and context usage.
State is sent as JSON lines over USB at 115200 baud; one cable provides power and data, no Wi-Fi is involved.
The ESP32-2432S024R with LVGL 9 is a stateless renderer with XPT2046 resistive touch; it draws what the daemon sends, reports taps back, and dims the backlight when idle.
A tap focuses the terminal by walking up from multiplexer pane (zellij or herdr), to tab (Tabby), to window (kitty, Ghostty, foot), with Hyprland integration on Linux.
cyberviber itself is a free, open-source project (source at github.com/d135-1r43/cyberviber) with no subscription or license fees mentioned on the page. Building the device requires buying the ESP32-2432S024R board (available on Amazon and AliExpress, price not stated on the page) plus a case (e.g. a mini monitor case on MakerWorld) and a USB cable; no prices are listed on the site.
A 2.4″ ESP32 touch display that lists the Claude Code and Mistral Vibe sessions running on your computer with their state (needs you, ready, working, idle), and lets you tap a session to focus its terminal pane, tab and window.
An ESP32-2432S024R — the 2.4″ "Cheap Yellow Display" with resistive XPT2046 touch and CH340 USB bridge, available on Amazon and AliExpress — plus a case (e.g. from MakerWorld) and one USB cable for power and data. The trailing R (resistive) matters: the C (capacitive) and 2.8″ ESP32-2432S028 variants are different boards and the firmware expects resistive touch.
Yes, the source is on GitHub at github.com/d135-1r43/cyberviber. There is no paid plan mentioned; you only buy the hardware parts yourself.
Yes. Run `cyberviber sim` to start a browser simulator with live sessions at http://127.0.0.1:7337/.
macOS and Linux with Hyprland 0.57+ (including Omarchy). Supported terminals and multiplexers include Ghostty, kitty, Tabby (plugin), foot, alacritty, zellij and herdr; the daemon's multiplexer and terminal integrations are pluggable and PRs are welcome for anything missing.
Install the Go binary with `go install github.com/d135-1r43/cyberviber/cmd/cyberviber@latest`, then run `cyberviber install`, which sets up the Claude hooks in ~/.claude/settings.json, the status line, the daemon (launchd or systemd) and Vibe hooks if ~/.vibe exists. Firmware is built and flashed with PlatformIO (`pio run -d firmware -t upload`).
No. All communication runs as JSON lines over USB serial at 115200 baud; a single cable handles both power and data.
Not fully. Vibe has fewer hooks: sessions appear with their first tool call or finished turn, questions show as needs-you, but permission prompts still show as "working", and there is no context usage display.